Eneo DLR3-08N/160CD Spezifikationen PDF herunterladen (Seite 45)

6. How to setup DVR:

D. Switch the DVR on.

E. Enter the Menu according to the DVR’s instruction manual.

F. Change the Port to „RS-232” of the remote control in the devices menu.

G. Conﬁrm matching the setup of RS-232 with the keyboard. Ex: Baud Rate:9600, Data Bit:8, Stop Bit:1, Parity:None)

H. Change the Remote Control to “Remote Control2” in the devices menu.

I. Change the Port to „RS-485” in the PTZ menu of the camera of the devices menu.

J. Conﬁrm matching the setup of RS-485 of the PTZ menu with PTZ cameras.

K. Set the PTZ menu according to PTZ cameras.

NOTE: The baud rate of all PTZ cameras should be used one speed type (ex. All 9600 or all 2400)

NOTE: The product of FASTRAX should be used „FASTRAX2”

L. Set the ID number according to PTZ cameras.

M. Set the system ID number to 1.

Operation of the keyboard

The camera selection and the full-screen selection of the DVR over 17 will change the number of the DVR automatically. The keyboard calculates the DVR’s

number based on 16 channel. When the PTZ camera is installed on the DVR, you should select the number of the PTZ camera by the number of the input

channel not the ID number of the PTZ camera. For example, when the PTZ camera with the 5 ID number is installed the number 1 of the input jack of the DVR,

to control the camera, you select 1 + CAM not 5 + CAM.

Action Key pressing Remark / LCD display

DVR selection

1 + DVR

Displays DVR-001 at the bottom line

Camera selection

1 + CAM or 16 + CAM CAM:0001 at the top line

17 + CAM

CAM:0001 at the top line

DVR-002 at the bottom line

NOTE: The camera number over 17 will change the DVR number automatically.

Camera selection of DVR #2

1 + CAM or 16 + CAM CAM:0001 at the top line

DVR-002 at the bottom line

Return to DVR #1

1 + DVR

CAM:0001 at the top line

DVR-001 at the bottom line

Full-screen selection

1 + MAIN or 16 + MAIN CAM:0001 at the top line

DVR-001 at the bottom line

16 + MAIN

CAM:0016 at the top line

DVR-001 at the bottom line

17 + DVR

CAM:0001 at the top line

DVR-002 at the bottom line

NOTE: The main number over 17 will change the DVR number automatically.

Return to DVR #1

1 + DVR

CAM:0001 at the top line

DVR-001 at the bottom line

Control SPOT output

1 + AUX1

Camera 1 goes to SPOT 1 output

16 + AUX2

Camera 16 goes to SPOT2 output

AUX1

Sequence SPOT 1 output

AUX1

Stop the sequence of SPOT 1 output

1 2 ... 40 41 42 43 44 45 46 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Eneo DLR3-08N/160CD Spezifikationen Seite 45

Kommentare zu diesen Handbüchern